Western Carolina University

A feature of the campus printing system is the PAW Print Document Server. Documents sent to the PAW Print driver are kept on a secure server for 24 hours. This service provides campus users with several options:

1. Documents can be released from any of over 180 devices located on the WCU campus - (PAW Print - Print Anywhere @ Western).
2. Documents can be released from the device while the owner is present.
3. Documents can be released as and when needed.
4. In the event the primary device you send documents to is in use or out of order, you can release printing at the next available device.

Identifying yourself at the PAW Print release station is the first step to releasing stored documents.

* Swipe your card with the magnetic stripe facing you and going into the PAW Print release station as shown or enter your nine-digit 92 number on the keypad.

* Select Enter.

 

Once the PAW Print release station has identified you and your account options, you will be asked to select your name for departmental billing options or choose Cat Cash if you wish to pay for the copies yourself. The arrow keys to the right of the display screen allow you to scroll up and down the through the available options.

* Choose the desired option and select Enter.

* From the next menu, press the F1 key below the Print display.

 

 

 

 

IMAGE MISSING

* When the Release key message appears, press Enter.

IMAGE MISSING

All: Pressing the F1 key below this command will release all stored jobs.

Select: Pressing the F2 key below this command will send you to another screen where you can scroll through your jobs and release the one(s) you need.

Find: If your total number of documents sent does not match the number found, you can press the F3 key below this command to allow the page release station to recheck the storage servers for additional documents.

IMAGE MISSING

* Use the scroll keys to highlight the job you wish to release.

* Press Enter when you have found the job you wish to release.

* Choose Print (F1) to release the selected job.

* Choose Del (F2) to delete the selected job.

* Choose End (F3) to terminate the PAW Print session.