Do you or a friend need a pedometer?

Campus Recreation & Wellness (CR&W) has solar pedometers available for only $5.00.  To purchase go to the Campus Rec Center (CRC).  You do not have to be a CRC member to participate in WHEE Walk or to purchase a pedmeter.  You may purchase one for a friend as well!

Setting your Pedometer (solar version)

Mode Button - M
Set button - S
Reset button - R
This is a dual powered pedometer with solar and back up battery. The solar panel is used to generate power to operate the pedometer in places with good sunlight or under strong light. The back up battery will only be active when there is not enough sunlight or strong light to function the pedometer.

Features

• Step counter: up to 99999 steps
• Distance traveled indication; Up to 99,999 KM/ mile
• Calories burnt indication; up to 9999.9 Kcal
• Low battery consumption; operated by 1 x 1.5V battery
• Auto shut off for one minute when idle

Operation
The paces are detected via the movement of the waist for accurate reading; mount the unit closer to the center of the body. 

Step counter function

• Press mode button until the arrow on the display pointing to “Step” marking. The step counter will start counting once motion is detected
• To restart the counter, press the Reset button until the digits revert back to zero

Distance traveled

• Press Mode button until the arrow on the display pointing to “KM” marking for the metric version. (For the imperial version, arrow will point to “MILE”).
• Press the “SET” button for adjusting the stride distance i.e. the distance for each pace. The digits on the display will start to flash**
• Press the “SET” button as many times as necessary to adjust desired value. Once the value is set, leave the unit idle for 3 seconds; it will revert back to the distance traveled mode.
• The distance travelled counter will start counting once motion is detected.
• To reset the distance traveled back to zero, press mode button until it is revert back to step counter mode. Press the Reset button until the digits revert back to zero.

Setting your Western Walks Pedometer (older version)

• Push yellow reset button
• Hit adjust button to read MI LB IN
• Push set button
• Hold down se button to set clock
• Adjust to 24 hr
• Push button set
• Adjust to correct hour. Push Set
• Adjust to correct minutes. Push Set
• Push mode button to read KCAL
• Hold set button to blink LB
• Adjust LB to correct weight. Push Set
• Push mode button to read MI
• Hold set button to blink IN
• Adjust to correct stride. Push Set
• Push mode button to read KCAL Target Remain
• Hold set button to blink
• Adjust to desired calories burned per week. Push Set
• Hold adjust button to zero out steps